|Place of Origin:||China|
|Minimum Order Quantity:||Negotiation|
|Payment Terms:||T/T, L/C|
|Supply Ability:||3000 seats per month|
|Operative Method:||Manual Or Power Operation||Row Depth:||650 Mm- 850 Mm/Customized|
|C/C Width:||460mm||Backrest:||Available Upon Request|
retractable auditorium seating,
retractable platform system,
Mental Platform Telescopic Seating Systems
Mental Platform Telescopic Color polymer Bench- Low Maintenance
Designed with anatomically contoured seat surface using blow molded construction that allow form-fit deflection for maximum spectator comfort. Cantilevered to the rear to provide not less than 75mm smooth toe space beneath the seat.
A. Integrated Power: Furnish and install an integral automatic electro-mechanical powered frame propulsion system, to open and close telescopic seating. Integral Power and Control System shall be CE stamped and tested.
1. Operation shall be with a remote control unit which can be operated independent of the seating bank for operator management of stop, start, forward, and reverse control of the power operation.
2. Each Powered Frame unit shall consist of output shaft gear reducer with 150mm diameter x 100mm wide wheels covered with non marking composite rubber.
B. Limit Switches: Furnish and install both open and closed limit switches for the integral power system. The limit switches will automatically stop integral power operation when seating has reached the fully extended or closed position.
Power operation shall utilize a combination of contactors and limit switches to insure the wiring is not energized except during operation.
C. Motion Monitor: Provide flashing light with self-contained warning horn mounted to the telescopic seating for audio and visual warning during integral power operation.
D. Electrical: Seating Manufacturer shall provide all wiring within seating bank including remote control device.
E. Electrical Switchboard and Enclosure: Seating Manufacturer shall provide a complete switchboard and enclosure with each seating bank. The location of the enclosure, and the specific electrical requirements will be detailed on the submittal drawings.
|Backrest||Available Upon Request|
|Row Riser height||250mm-300 mm/Customized|
|Material of the frame||
Steel with powder coatingdecking: anti-slip plywood deck
|Optional color||refer to pantone color swatch|
|Test Report||EN 13200-5|
1) The Echo Bench can be provided within our unique VIP design
2) Seat module shall have recessed pockets to accept seat number plates.
3) Each end of row shall be enclosed with metal end cap. End caps shall be designed flush
with screw fixing Row letters Optional.
Contact Person: sales