|Place of Origin:||China|
|Minimum Order Quantity:||Negotiation|
|Payment Terms:||T/T, L/C|
|Supply Ability:||3000 seats per month|
|Product Name:||Innovative Retractable Bleacher Seating||Platform:||Wall Attached Unit|
|Seat Color:||Blue, Red Or Customized||Seat Number:||Optional|
|Operative Method:||Manual Or Power Operation||Application:||Multi - Use Sport Court|
retractable gymnasium bleachers,
retractable audience seating
Innovative Retractable Bleacher Seating / Telescopic Spectator Grandstands
1. Melody Chair metal brackets are bolted to the plywood decks at the centre's detailed on the
drawing. Bolts with Nyloc Nuts and washers are to be used.
2. Melody polymer seat is starting with an economical nose mounting seat with a folding back, or it can
be installed with a folding mechanism and a tip - up base.
3. Melody seat brackets standard color is black.
4. Seat module have recessed pockets to accept seat number plates.
5. Blow moulded construction for greater strength and comfort
6. Fixed melody and melody with folding mechanism are available
|Row Depth||850 mm- 900 mm/Customized|
|Row Riser height||300mm-350 mm/Customized|
|Stair width||920mm / 1000mm / Customized|
|Material of the frame||
Steel with powder coating
Decking: anti-slip plywood deck
|Material of the seat||HDPE; Upholstered|
Under structure : black, grey, blue color or customized
Seat color : please refer to Burgeon color swatc
|Optional color||refer to pantone color swatch|
|Operative method||Manual or Power Operation|
|Test Report||EN 13200-5|
1) Wheels: Wheels with non-marking poly urethane face to protect wood and synthetic floor surfaces, with molded-in metal bush and bearing to fit a10mm diameter axles secured with C Clips.
2) Slant Columns: Tubular Shape Steel (RHS).
3) Deck Stabilizer: Steel components bolted to nose and riser at three locations per section. Interlocks with adjacent stabilizer on upper tier using low-friction nylon roller to prevent separation and misalignment.
4) Deck Support: Securely captures decking for entire length of section.
1) Section Lengths: Each bank shall contain sections not to exceed 5980mm in length with a minimum of two supporting frames per row, each section.
2) Rear Riser: Continuous roll formed steel members
3) Nosing: Continuous Tubular Steel Section (RHS)
4) Deck End Overhang: Not to exceed frame support by more than 1715mm
Contact Person: sales