Sports Venues Spectator Retractable Audience Seating Wall Attached Unit With Aisle Steps

Sports Venues Spectator Retractable Bleacher Seating with Aisle Steps

Desciption

Burgeon Melody upholstered retractable bleacher seating can provide numerous differing seating applications, starting with an economical nose mounting seat with a folding back, or it can be installed with a folding mechanism and a tip-up base. This seat can deliver a diversity that is unparalleled within our flexible seating range.

Specification

• Row depth : 850 mm - 900mm or customized.
• C/C width : 460mm - 500mm
• Seat center : 460mm - 500mm
• Stair width : 920mm/1000mm/Customized
• Row riser height : 300mm - 350mm or customized
• Seat number : optional
• Frame material : steel with powder coating
• Seat color : please refer to Burgeon color swatch
• Operative method : manual or power operation
• Decking : anti - slip plywood
• Optional color : refer to pantone color swatch
• Understruture color : black, grey, blue color or customized
• Test Report : EN 13200-5

Understructure Introduction

A.Frame System:

1) Wheels: Wheels with non-marking poly urethane face to protect wood and synthetic floor surfaces, with molded-in metal bush and bearing to fit a10mm diameter axles secured with C Clips.

2) Slant Columns: Tubular Shape Steel (RHS).

3) Deck Stabilizer: Steel components bolted to nose and riser at three locations per section. Interlocks with adjacent stabilizer on upper tier using low-friction nylon roller to prevent separation and misalignment.

4) Deck Support: Securely captures decking for entire length of section.

B.Deck System:

1) Section Lengths: Each bank shall contain sections not to exceed 5980mm in length with a minimum of two supporting frames per row, each section.

2) Rear Riser: Continuous roll formed steel members

3) Nosing: Continuous Tubular Steel Section (RHS)

4) Deck End Overhang: Not to exceed frame support by more than 1715mm

Options include:

• Seat Number
•  Padded Seat Base and Folding Backrest
•  Full Upholstered Seat Base and Backrest
•  Leather Upholstery
•  Fabric Upholstery

•

Accessories:

1) Variable Row 1: Provide first row recoverable modular seating units to be utilized for both wheelchairs and able-bodied persons.

2) Seat Numbers: Provide each plastic seat module oval etched plate. Easy to read black numerals will be on the plate fitted in a vandal resistant recess

3) Row Letters: Provide at each row end of plastic seat a 50mm x 50mm oval etched plate with black numerals.

4) Portable Access Stair: Provide portable stair units with hand rails.

5) Carpeted Decks: Provide at decks and steps carpet as selected. Color to be of manufacturee's standard selection.

Application